|
|
 |
|
|
|
Features
- Heats one gallon of water from 60F to 130F in approximately
10 minutes.
- Simple operation - plug into any grounded outlet.
- Automatic safety switch.
- Full one year manufacturer's warranty.
|
|
|
|
|
|
Cautions
- DO NOT COMPLETELY IMMERSE IN WATER. The handle and power cord are not designed to
withstand boiling water. Always keep the handle and power cord out of water.
- Before use, inspect the heater for any excessive lime build-up, cracks in the heating element or
other damage or wear. Discontinue use immediately if any flaw is observed.
- Connect only to properly grounded, 120 VAC, ground fault interrupter (GFI) protected outlet.
- Never operate this heater without the guard securely in place over the heating element. If
operated without the guard in place a fire hazard will result.
- Always unplug this heater before you remove it from the water or before leaving it unattended.
- The silver-colored stainless steel tube contains a thermal overload safety switch. Always be
sure this tube is tightly connected to the black heating element. If a gap occurs between this
type and the heating element, a fire hazard will result.
- This heater contains a thermal overload switch. If the thermostat fails, the heater will
permanently shut off to prevent a fire hazard.
|
|
|
|